What is the trick to removing the pump??
I removed the trim linkage bolt, the steering bold and the 4 nuts and washers that hold the pump on.What is holding this damn pump on still? Does anyone have a trick to it? Do I need to remove the...
View ArticleRe: What is the trick to removing the pump??
I cant get my impeller off the shaft! Is there anything I can go to help it come loose???-Jared'99 Ultra - DynaFly 16/20, ShredMaster Rideplate, Pisser Mod, JetTrim Seat Cover
View ArticleRe: What is the trick to removing the pump??
Which Shaft? The drive shaft or the shaft in the pump?'99 Ultra 150ADA Head w/42cc DomesSolas 16/20 DynaflyShredmasterKawasaki Seat Cover"FRIENDS DON'T LET FRIENDS BUY SEADOO"
View ArticleRe: What is the trick to removing the pump??
The shaft in the pump.-Jared'99 Ultra - DynaFly 16/20, ShredMaster Rideplate, Pisser Mod, JetTrim Seat Cover
View ArticleRe: What is the trick to removing the pump??
The prop comes very tight. You might want to use a breakerbar. It come off counter clockwise.Eggy
View ArticleRe: What is the trick to removing the pump??
Put the flat sides of the shaft in a quality vise and heave ho. It is on tight!'99 Ultra 150ADA Head w/42cc DomesSolas 16/20 DynaflyShredmasterKawasaki Seat Cover"FRIENDS DON'T LET FRIENDS BUY SEADOO"
View ArticleRe: What is the trick to removing the pump??
I'm just about to give up on this pump removal. Took the advice of many on board here with no success.Removed the 4 bolts holding the tapered nozzle, then 4 - 14mm bolts holding the pump to the long...
View ArticleRe: What is the trick to removing the pump??
Not sure if anyone mentioned it but did you remove the 2 screws attached to the ride plate?Don`t know what to tell ya if you did... mine came off with some wigling and prying the ride plate donwn a...
View ArticleRe: What is the trick to removing the pump??
Try to get some PB around the rubber gasket that goes into the pump shoe. I also have an idea, but it might hurt!lolChain that pump to a stationary surface (another trucks bumper will work fine). then...
View ArticleRe: What is the trick to removing the pump??
8YORMA,,, good question,,, ???? 99 ULTRA 150, ADA sponsons, Worx intake, WCOT head mod, shred-master ride plate, hydro-turf mats, Hydro-turf chin pad, Jetlyne inline strainer, AP designs seat, solas...
View ArticleRe: What is the trick to removing the pump??
he has the ride plate and intake off99 ultra- beachhouse sponsons --r&d grate--shredmaster ride plate--solas dynafly 16/20 prop--shimmed pump--air intake mod--500gph bilge pump--hydro turf...
View ArticleRe: What is the trick to removing the pump??
Blastin... Is this a new ski?? Or has the pump been off before???~~Deathjester~~2000 Ultra 150 - ADA Head w/42cc domes - Prok Flame Arrestors - Tripple Pissers - Worx Intake Grate and Sponsons -...
View ArticleRe: What is the trick to removing the pump??
You may laugh but I had to put mine in a freezer for a while and then it came off fairly easy. Up until then I thought I would break the shaft before it would break loose. In case your wondering...
View ArticleRe: What is the trick to removing the pump??
My freezer is definately not big enough to put my ski in. Jeez, guess I need to run down to Sears and see what they have in stock.
View ArticleRe: What is the trick to removing the pump??
lol @ ladude, I was thinking the same thing..Anyone have a walk-in? Steve...Ultra150.com....Administrator Kawasaki go green or go home
View ArticleRe: What is the trick to removing the pump??
Ok so I was talking about the impellor,my bad. Ken
View ArticleRe: What is the trick to removing the pump??
Spray Liquid wrench on the 4 studs. Use a gear puller on the left bottom stud and one on the right top stud. both at the same time. With enough turns on the puller it will come off. Keep saying to...
View ArticleRe: What is the trick to removing the pump??
Gasket and studs have been hit with PB all week.For the truck pull idea...I had come a long attached to my truck and winched up so tight you could tightrope walk on it.Ski has 115 hours on it,...
View ArticleRe: What is the trick to removing the pump??
The salt can pit aluminum to the point where it pratically welds itself to the mating surfaces.Good luck.'99 Ultra 150ADA Head w/42cc DomesSolas 16/20 DynaflyShredmasterKawasaki Seat Cover"FRIENDS...
View ArticleRe: What is the trick to removing the pump??
Yet another pump question!! When I put everything back in my pump; seals, bearings etc. Do I need to put a light coating of marine grease or any lube on any of the parts???-Jared'99 Ultra - DynaFly...
View Article
